Clamptek Qualified Factory Hydraulic Support Clamp/ Cylinder CSP-P Series
Product Information
High support force: The clamping force between the piston rod and the clamp cover is increased, thus a higher workpiece support force is produced.Cutting fluid cleaning countermeasures: In order to prevent improper actuation caused by high-pressure coolant and chip dust intruding into the internal structure, air cleaning can be performed in the vent hole when replacing the workpiece.
Air cleaning requires a special-purpose pneumatic circuit.(Recommended cleaning air pressure 0.3-0.5MPa)
Common piping base: It can be installed with the same Japanese cylinder specifications in the current market and has interchangeability.
Hydraulic pressure rising type:
The initial state of the piston rod is falling. The supply oil pressure makes the piston rod rise and stops after getting into contact with any position of the supply part. At the same time, the clamping force acting on the clamp cover by oil pressure is applied to the piston rod, so that the piston rod can firmly support the workpiece.
Spring rising type:
The initial state of the piston rod is rising, and the workpiece is placed on the piston rod and lowered to a certain distance due to the weight of the workpiece. At this time, the clamping force acting on the clamp cover by supply oil pressure is applied to the piston rod, so that the piston rod can firmly support the workpiece.
Ordering Indication
(eg.CSP-30BLK(H))| CSP | Series | CSP |
|---|---|---|
| 30 | Oil Cylinder External Diameter | M26x1.5, M30x1.5, M36x1.5, M45x1.5 |
| B | Type | A: Spring Rising Type, B: Hydraulic Rising Type(Standard) |
| L | Pressure | L: Low Pressure |
| K | Format | K: K Type, P: P Type |
| H | Piston Spring Force | Blank: Standard Type, H: Strong Spring(Please call for a consultation before ordering) |
Product Information
| Model | CSP-26 | CSP-30 | CSP-36 | CSP-45 |
|---|---|---|---|---|
| Workpiece Support Force(when oil pressure is 7MPa)(kgf) | 200 | 300 | 400 | 700 |
| Oil Cylinder Flow(cm³) | 0.5 | 0.7 | 0.8 | 2.3 |
| Rising Spring Force(kgf) | 0.2~0.4 | 0.4~0.6 | 0.3~0.5 | 0.3~0.6 |
| Piston Rod Stroke(mm) | 6.5 | 8 | 8 | 10 |
| Maximum Working Pressure(MPa) | 7 | 7 | 7 | 7 |
| Minimum Working Pressure(MPa) | 2.5 | 2.5 | 2.5 | 2.5 |
| Ensure Overpressure-resistant(MPa) | 10.5 | 10.5 | 10.5 | 10.5 |
| Operating Temperature(°C) | 0~+70°C | 0~+70°C | 0~+70°C | 0~+70°C |
| Quality(kg) | 0.2 | 0.3 | 0.4 | 0.7 |
Please feel free to contact us to get more information.
